OilPro can source and supply new or surplus air and gas compression ranging from 2 hp to 6,000 hp plus. Have a unique application? Let us help you find the best solution.
COMP-GAS-CAT3306-ARIELJGP/2-FR (COM-1007)
Cat 3306 - Ariel JGP/2 BTB Compressor package
Unit 2000-023 Model B145 - Enerflex
Configuration: Cyl # 1 Throw 2, class JG, MAWP 1640 psig, SN C-40678, ,VVCP SN U-22512, Suction PN B-812-E, Disch PN B813H Cyl. No 2 Throw 1, class JG, MAWP 1640 psig, SN C40679, VVCP SN U-22513, Suction PN B-812-E, Disch PN B813H
Coupling: Thomas 312 CMR CSA Registered Electrical
Material List highlights: Aluminum panel cabinet Altronic Annunciator Power Supply Tach, overspeed, hour meter Altronic Barrier Pressure gauges, Murphy PI, Wika Start valve Amot 3 way relief valves Pressure regulators, Fisher 67AFR Loss of power relay Manual Speed regulator, Fisher Auto bypass
This unit is in OilPro inventory anc is available on an as-is basis or reconditioned Photos, viewing available at your convenience.
Gardner Denver rotary screw gas compressor c.w. CAT 3304 Natural Gas fuel driver The above are packaged in a cold weather, skidded enclosure
COMPRESSOR Features:
• O-ringge seals.
• Large rotors and bearings for low speed operation.
• Cylindrical roller inlet bearings.
• Tapered roller discharge bearings.
• Automatic Turn Valve capacity control.
• Stop-limits for fully opened and fully closed turn valve positions.
• Turn Valve indicator standard on Turn Valve-equipped gas ends.
• 3 Axis vibration pick-up points.
• Available frame-mounted oil pump.
• Available vertical or horizontal inlet valve.
• Available auxiliary shaft.
Design Details Brake Horsepower 90 Max. Inlet Pressure 50 PSIG Max. Discharge Pressure 375 PSIG Max. RPM Range 863 - 3777 Vi's Available 1.8; 2.2; 3.0; 5.2 Rotor Dimensions Male Rotor O.D. 7.0" Female Rotor O.D. 6.5" Length 12.1" L/D Ratio 1.74 Input Shaft O.D. 1.7490" - 1.7495" Keyway 0.375 in Stiffness 2.76 x 106 in-lb/rad Auxiliary Shaft O.D. 1.25" Moment of Inertia 3.57 lb-ft2 Mounting Flanges Available SAE (3,1) "C" Flange Plain (Foot) Mounting Discharge Flanges 2.5" 150#, or 2.5" 300# Inlet Valve Flanges 4" 150# Vertical, or 2.5" NPT Horizontal
Materials Rotors Nodular Iron Bearings Steel Frame Cast Iron Shaft Seals Mechanical Oil Pump (0 PSI, 1800 rpm, 200 SSU) Capacity: 18 GPM Horse Power: 0.8 HP Exclusive Gardner Denver Features: KYPHO rotor profile returns greater efficiency over its operating range and delivers a 3% to 5% operating efficiency advantage Rotors, up to 41% larger in dia. for lower operating speed Long-life bearings mean longer service Tapered roller bearings and vibration pick-up points
DRIVER CAT 3304 in-line, four-stroke-cycle engine 95 BHP @ 100% load, 71 BHP @ 75% load 425 cu.in 1800 rpm Fuel consumption 7567 BTU.hr @ 100%, 7842 @ 75% Jacket Water capacity : 4.2 USG Lube Oil system refill: 8.3 USG interval change: 250 hrs Std. features: Air cleaner with rain cap Gear-driven jack water pump Altronic V ignition system Instrumentation service meter Oil cooler, filler & dipstick Mounting system engine supports Shutoff protection system
PACKAGE SPECIFICS
Building: Self-framing, R-12 insulated Self-framing metal building Tan with Brown trim 2 sets of double doors c.w. weep, panic hardware Louvered vents Note door glass is wire reinforced (May requrie replacement in ND due to local safety regs) Gable-style roof Catalytic heater 12VDC start c.w. start cables Skid Main I-beam c.w. Pull bar and sling ears for Compressor/engine support Wings for building support and Separator/Blowcase foundation Grey enamel c.w. Floor Grating for equipment access Extension for aerial cooler support
Bill of Materials: V-110 1 Inlet Separator: 24" OD x 58" OAL 1/16" Corrosion Allowance ASME Section VIII, Div.1 MAWP: 300 psig @ 450 deg F MDMT: -20 deg F @ 300 psig
LSH-110 1 Electronic Level Switch High: Kimray Model CEC2, 2" NPT, 316SS LC-110 1 Pneumatic Level Switch: Kimray Model 2200 PLS, 2"NPT, 316SS, Cat. No. CUALTN, Intermittent, Snap Acting, 30 psig output (Stock) LCV-110 1 Level Control Valve: Dyna-Flo DF100, 1" ASME 900 NPT Globe, 1/2" Port, 0-35 psig spring range, Fail Closed LG-110 1 Level Gauge: Penberthy 1RL7 c/w 3/4" NPT 330J gauge valves PI-110 1 Pressure Indicator: Wika SS LF, 0-100 psig, 1/4" NPT LM, 2-1/2" Face PSV-110 1 Pressure Relief Valve: Mercer 9100 Series, 1-1/2" NPT x 2"NPT G Orifice, Set @ 50 psig TI-110/121 2 Temperature Indicator: Trend 50-500 deg F, 1/2" NPT x 2-1/2" Stem, 3" face TW-110/121 2 Thermowell: 1/2" x 1/2" x 2-1/2" long, 316SS
V-120 1 Oil Separator: 24" OD x 58" OAL 1/16" Corrosion Allowance ASME Section VIII, Div.1 MAWP: 300 psig @ 450 deg F MDMT: -20 deg F @ 300 psig
LSL-120 1 Electronic Level Switch Low: Kimray CEC2, 2" NPT, 316SS LG-120 1 Level Gauge: Penberthy 1RL7 Reflex c/w 3/4" NPT 330J gauge valves PI-120 1 Pressure Indicator: Wika SS LF, 0-400 psig, 1/4" NPT LM, 2-1/2" Face PSV-120 1 Pressure Relief Valve: Mercer 9100 Series, 1" NPT x 1" NPT, D Orifice, Set @ 300 psig S/N: 1391465 TI-120 1 Temperature Indicator: Trend 50-500 deg F, 1/2" NPT x 2-1/2" Stem, 3" face TW-120 1 Thermowell: 1/2" x 1/2" x 2-1/2" long, 316SS
PI-301 1 Pressure Indicator: Wika SS LF, 0-400 psig, 1/4" NPT LM, 2-1/2" Face PI-302 1 Pressure Indicator: Wika SS LF, 0-100 psig, 1/4" NPT LM, 2-1/2" Face PI-303 1 Pressure Indicator: Wika SS LF, 0-60 psig, 1/4" NPT LM, 2-1/2" Face
T-400 1 Engine Jacket Water Surge Tank c/w Vent Cap LSC-400 1 Jacket Water Level Controller, Murphy EL150-K1
E-400 1 Air Cooled Heat Exchanger: Air X Model 42VIS E-410 1 Gas Aftercooler Section: 3" CL300 RF Inlet & Outlet MAWP: 350 psig @ 300 deg F MDMT: -20 deg F @ 350 psig
E-420 1 Engine Jacket Water Section: MAWP: 14 psig @ 300 deg F MDMT: -20 deg F @ 14 psig
E-401 1 Brazed Plate Heat Exchanger: Alfa Laval Model CB76-100H Max. WP 435 psig @ 437 deg F
TI-401 1 Temperature Indicator: Trend 50 to 500 deg F, 1/2" NPT x 2-1/2" stem, 3" Face TW-401 1 T hermowell: 3/4" x 1/2" NPT x 2-1/2" long, 316SS TI-410/411 2 Temperature Indicator: Trend 50 to 500 deg F, 1/2" NPT x 2-1/2" stem, 3" Face TW-410/411 2 Thermowell: 3/4" x 1/2" NPT x 2-1/22" long, 316SS TI-420/421 2 Temperature Indicator: Trend 50 to 500 deg F, 1/2" NPT x 2-1/2" stem, 3" Face TW-420/421 2 Thermowell: 3/4" x 1/2" NPT x 2- 1/2" long, 316SS
Gardner Denver rotary screw gas compressor c.w. CAT 3304 Natural Gas fuel driver The above are packaged in a cold weather, skidded enclosure
COMPRESSOR Features: • O-ring flange seals. • Large rotors and bearings for low speed operation. • Cylindrical roller inlet bearings. • Tapered roller discharge bearings. • Automatic Turn Valve capacity control. • Stop-limits for fully opened and fully closed turn valve positions. • Turn Valve indicator standard on Turn Valve-equipped gas ends. • 3 Axis vibration pick-up points. • Available frame-mounted oil pump. • Available vertical or horizontal inlet valve. • Available auxiliary shaft.
Design Details Brake Horsepower 90 Max. Inlet Pressure 50 PSIG Max. Discharge Pressure 375 PSIG Max. RPM Range 863 - 3777 Vi's Available 1.8; 2.2; 3.0; 5.2 Rotor Dimensions Male Rotor O.D. 7.0" Female Rotor O.D. 6.5" Length 12.1" L/D Ratio 1.74 Input Shaft O.D. 1.7490" - 1.7495" Keyway 0.375 in Stiffness 2.76 x 106 in-lb/rad Auxiliary Shaft O.D. 1.25" Moment of Inertia 3.57 lb-ft2 Mounting Flanges Available SAE (3,1) "C" Flange Plain (Foot) Mounting Discharge Flanges 2.5" 150#, or 2.5" 300# Inlet Valve Flanges 4" 150# Vertical, or 2.5" NPT Horizontal
Materials Rotors Nodular Iron Bearings Steel Frame Cast Iron Shaft Seals Mechanical Oil Pump (0 PSI, 1800 rpm, 200 SSU) Capacity: 18 GPM Horse Power: 0.8 HP Exclusive Gardner Denver Features: KYPHO rotor profile returns greater efficiency over its operating range and delivers a 3% to 5% operating efficiency advantage Rotors, up to 41% larger in dia. for lower operating speed Long-life bearings mean longer service Tapered roller bearings and vibration pick-up points
DRIVER CAT 3304 in-line, four-stroke-cycle engine 95 BHP @ 100% load, 71 BHP @ 75% load 425 cu.in 1800 rpm Fuel consumption 7567 BTU.hr @ 100%, 7842 @ 75% Jacket Water capacity : 4.2 USG Lube Oil system refill: 8.3 USG interval change: 250 hrs Std. features: Air cleaner with rain cap Gear-driven jack water pump Altronic V ignition system Instrumentation service meter Oil cooler, filler & dipstick Mounting system engine supports Shutoff protection system
PACKAGE SPECIFICS
Building: Self-framing, R-12 insulated Self-framing metal building Tan with Brown trim 2 sets of double doors c.w. weep, panic hardware Louvered vents Note door glass is wire reinforced (May requrie replacement in ND due to local safety regs) Gable-style roof Catalytic heater 12VDC start c.w. start cables Skid Main I-beam c.w. Pull bar and sling ears for Compressor/engine support Wings for building support and Separator/Blowcase foundation Grey enamel c.w. Floor Grating for equipment access Extension for aerial cooler support
Driver Waukesha H2476 Ser. No. 52713 Gov. Spd: 1,000 F.L Spec.: U34096 Size 7,500 x 7 NOTE: This older engine is available for parts or whole.
Cooler 1 Air X Changers Max DP: 14 psi @ 300 F MDMT: -20 F @ 50 PSI Ser. no. B838657.1 Built in 1994 Hydro @ 75# ITEM EJW
Cooler 2 Air X Changers Max DP: 300 psi @ 300 F MDMT: -20 F @ 300 PSI Ser. no. B838657.2 Built in 1994 Hydro @ 450# ITEM IC CRN H-8152.2 Nat'l Bd No. 24093 U-Stamp, GU Stamp
Cooler 3 Air X Changers Max DP: 645 psi @ 350 F MDMT: -20 F @ 645 PSI Ser. no. B838657.3 Built in 1994 Hydro @ 968# ITEM AC CRN K-2766.2 Nat'l Bd No. 24094 U-Stamp, GU Stamp
Compressor: Ariel JGW/2 Frame Ser. No. F-4162 1200 RPM Rated Built July 1983