Innopipe Piggable Drip
Section size: NPS 12 pipe size X NPS 18 outer chamber
Overall Length: 16 feet
Weight: 2500 lbs
Piggable: Yes
Installation: Below GradeConnections:
• Gas Inlet/Outlet: Qty (2) - NPS 12, 0.375" Nom. to match customer line pipe- API 5L X52/CSA Grade 359
• Outlets to Reservoir: Qty (2) - NPS 3 BE Sch 80- SA-106-B SMLSSizing Criteria: Gas Flow Rate- 2,500 mcfh (60 mmscfd)
Gas Specific Gravity: 0.58Liquid Flow Rate 180 lb/MMCF (250 USG/per d. / unit average)Design Pressure: 720 psi, Class 300 ANSI
Operating Pressure: 350 psigPipeline Size NPS 12 API 5L X52 ( t nom - 0.375" )
Design Code ASME B31.8 (Prefabricated Assemblies Paragraph 831.3.5)
RequirementSour Service NACE MR0175/ISO 15156 compliance requiredHydrotested 1.5 x 720 psi = 1,080 psi min. (1,175 is available at no additional cost)
Hydro to be held for 4 hours c.w. pressure chart recorder, as per ASME code B31.8Note:
• All nozzles and reinforcement shall be set through, full penetration welded
• External- Sandblasted and Tarset or equivalent Coal Tar Epoxy to coating manufacturer's specificationsInnopipe Piggable Drip System- Rated Capacity
Gas Flow Rate (99.9% free liquid removal):
100 mmscfd @ 500 psi
75 mmscfd @ 350 psi
Maximum Pressure Drop across Separator:
less than one psi
Liquid Removal Capacity: Up to 1,000 Bbl/day.

Show Less

Innopipe Piggable Drip   NPS 16 with NPS 24 Liquid Reservoir
Thank you for the opportunity to provide you with this quotation 


Item #: 1
Quantity: 1
Description
Innopipe Piggable Drip 
Section size:
NPS 16  pipe size X NPS 24 outer chamber
Overall Length:
12 feet
Weight:
2400 lbs
Piggable:
Yes ( with valving) 
Installation:
Below Grade


Integral Liquid Reservoir 
Size:
NPS 24 pipe size x 12 ft overall
Capacity:
6 Bbls of liquid 
Weight:
2500 lbs
Installation:
Below Grade- (2- NPS Drain Valves at surface)


Supply in accordance with:
Data Sheet ____Innopipe PS-07___CSA Z662/  ASME B31.3 or ASME B31.8____


Maximum Working Pressure: 
740 psig Drip Barrel- CL 300


Design Temperature:
-20 deg F to 120 deg F
Corrosion Allowance:
Not Required
NDE:
As Required
Hydrotested to 1.5 x MAWP
Note:
• All nozzles and reinforcement shall be set through, full penetration welded, 
• Sandblasted and externally primed ( epoxy coating available on request) 
• Supplied with all applicable Quality Control Documentation and As-Built drawings.
• Installation and Operations Manuals.


Innopipe Drip (1a) Connections:
• Gas Inlet/Outlet:
Qty (2) - NPS 16 beveled and ID to match customer line pipe - NPS 16. ________(to be confirmed by customer)
• Outlets to Reservoir:
Qty (2) - NPS 4" Sch 80- Integral to design


Liquid Reservoir (1b) Connections:
• Inlets from Innopipe Drip:
Qty (2) - NPS 4" Sch 80- Integral to design
• Liquid out/ Drain Connection:
Qty (2) - NPS 2" Sch 80 ASME 300# RFWN ( to surface)
• Level Switch:
Qty (1) NPS 4 ASME 800# RFWN (Optional)


Rated Capacity
Gas Flow Rate (99.9% free liquid removal):
160 MMSCFD @ 500 psi

Maximum Pressure Drop across Separator: 
less than 1 PSI
Liquid Removal Capacity:  
Approx. Up to 200 Bbl/day.( with option auto dump)

NPS 16 x 24 Innopipe Drip c/w
NPS 24 x 12' long Reservoir


Option:
Add Interconnecting Piping and Valves  

Total Turn Key 
Ready to install with Two-16"  field welds to tie in.  
On Request


Notes: 
1. Larger reservoir sizing and liquid control options available.
2. Shipping arranged by Purchaser (or by OilPro at cost +10%, whichever customer chooses.) 


Delivery: 5-6  weeks after receipt of Customer approved IFC drawings 

Show Less

Innopipe Piggable Drip
Section size: NPS 12 pipe size X NPS 18 outer chamber
Overall Length: 16 feet
Weight: 2500 lbs
Piggable: Yes
Installation: Below GradeConnections:
• Gas Inlet/Outlet: Qty (2) - NPS 12, 0.375" Nom. to match customer line pipe- API 5L X52/CSA Grade 359
• Outlets to Reservoir: Qty (2) - NPS 3 BE Sch 80- SA-106-B SMLSSizing Criteria: Gas Flow Rate- 2,500 mcfh (60 mmscfd)
Gas Specific Gravity: 0.58Liquid Flow Rate 180 lb/MMCF (250 USG/per d. / unit average)Design Pressure: 720 psi, Class 300 ANSI
Operating Pressure: 350 psigPipeline Size NPS 12 API 5L X52 ( t nom - 0.375" )
Design Code ASME B31.8 (Prefabricated Assemblies Paragraph 831.3.5)
RequirementSour Service NACE MR0175/ISO 15156 compliance requiredHydrotested 1.5 x 720 psi = 1,080 psi min. (1,175 is available at no additional cost)
Hydro to be held for 4 hours c.w. pressure chart recorder, as per ASME code B31.8Note:
• All nozzles and reinforcement shall be set through, full penetration welded
• External- Sandblasted and Tarset or equivalent Coal Tar Epoxy to coating manufacturer's specificationsInnopipe Piggable Drip System- Rated Capacity
Gas Flow Rate (99.9% free liquid removal):
100 mmscfd @ 500 psi
75 mmscfd @ 350 psi
Maximum Pressure Drop across Separator:
less than one psi
Liquid Removal Capacity: Up to 1,000 Bbl/day.

Show Less

There are currently no details for this product.

Show Less

There are currently no details for this product.

Show Less

2X6-1480 Innopipe SeparatorSizing Criteria:
1075 std m3/hr @ 1200 PSI
Operating Pressure:%u00A0
600-1200 psig
Operating Temperature:%u00A0
0-15 C
SG of Gas:- 0.65 %u00A0Inlet Line:
NPS 62 ASME 600# Optional Threaded
Corrosion Allowance:
noneConstruct to CSA B51-14 / ASME Section VIII Div 1 2017 Edition
Registered as ABSA Pressure Fitting %u00A0CRN%u00A0
Design Pressure :%u00A0
10,204 kPag ( 1480 psig)
Design Temperature:%u00A0
29 C to 38 C
Item #: 1%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0Quantity: 1
Description
Separator section size:%u00A0
NPS 2 %u00A0pipe size X NPS 6 outer chamberOverall Length:%u00A0
Approximately 1.0 m%u00A0
Liquid Chamber Size:%u00A0%u00A0%u00A0%u00A0
NPS 6" x 24"%u00A0%u00A0%u00A0%u00A0
Above Ground Installation : Yes
Piggable : %u00A0YES or NO, %u00A0please specify at time of orderNDE: %u00A0 %u00A0
As required by Code%u00A0
Stress relieved:%u00A0
no
Materials of Construction:%u00A0
SA-106-B /SA-105
Registered as Pressure Vessel%u00A0
CRN R2417.2- with ABSA certification -
Hydrotested to 1.3 x Maximum Allowable Working Pressure
Approximate Weight:
200 lbsSeparator Connections:
Inlet/Outlet:%u00A0
Inlet/Outlet:%u00A0
NPS 2 - Sch XS - ASME 600 RFWN SA-105
4- %u00A0NPT 3/4" %u00A03000# SA-105N - Level Gauges, %u00A0( each side)%u00A0
2- %u00A0NPT 1" %u00A03000# SA-105N - Vent, PSV, %u00A0
2 - NPT 2" %u00A03000# SA-0105N - Liquid Outlet , Level Control (future),All nozzles and reinforcement shall be set through, full-penetration weldedRated Gas Capacity (99.9% free liquid removal):
9,000 Sm3/hr @ 1200 psi %u00A0
5000 Sm3/hr @600 psiRated Liquid Capacity:
10 m3/hr condensate,%u00A0
Liquid Storage:%u00A0
3-5 gallons
Maximum Pressure Drop across Separator:%u00A0
less than 10 kPaAuxiliary Equipment included:
NPT 2" - 3000# Gate Valve%u00A0
NPT 3/4" Level Gauge
NPT 1" - 3000# Gate/Ball Valves/PSV
NPS 6"- %u00A0600# %u00A0Bolting and GasketsDelivery: 4 %u00A0weeks a.r.a.d.%u00A0
Please check at time of order of if this does not meet your requirementsOperation Guarantee:
The Innopipe pipeline separators are designed to remove free liquids from natural gas streams. Independent tests shows they remove 99% of the normally flowing free liquids that the separator will see based on provided pipeline design flow conditions provided.%u00A0

Show Less

Note: Photo is of 2" similar design unitNPS 3 x 10 - %u00A01440 PSIG Innopipe Separator %u00A0Sizing Criteria: Operating Pressure (5.5 mmscfd @ 300psig)%u00A0
SG of Gas - 0.65 - 0.70Gas Inlet/Outlet Line - %u00A0NPS %u00A06 ASME 600# RF ( Reduce to NPS 3?)
Liquid Out - NPT 1 Manual Valve ( %u00A0Automated Dump Optional)Construct to CSA B51-19 / ASME Section VIII Div 1 2021 Edition
Above Ground Installation- %u00A0Alberta CRN R4139.2
ASME U Stamp/ National Board Registration available.Above Grade- Non PiggableDesign Pressure: 9,930 kPag ( 1440 psig)
Design Temperature: --20 to 120 %u00B0FItem #: 1%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0
Description- Innopipe Separators utilize patented flow communicating chambers
with liquids retained in stabilized reservoirSeparator Size:%u00A0
NPS 6 X NPS 10 %u00A0In-Line Horizontal Orientation
Footprint %u00A048" high x 48" Inlet/Outlet FlangeLiquid Reservoir Size:%u00A0
NP 10 x 36" %u00A0app 2 cu ft. ( app 15 gallons)%u00A0
Supports :2 Saddle Supports %u00A0w/ anchor provisionPiggable: %u00A0Not required,%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0NDE: %u00A0RT-1 Full As required by Code%u00A0
Stress Relieved: As required by Code
Service: %u00A0SweetMaterials of Construction: SA-516-70N/SA-106-B SMLS/ SA-105NHydrotested : %u00A0As required by Code%u00A0%u00A0%u00A0%u00A0
Approximate Weight: app 1,500 lbsSeparator Connections:
Gas Inlet/Outlet: 2- NPS 6 %u00A0Sch 80 ASME 600 RFWNLiquid Reservoir Connections:Liquid Outlet: 1 - NPT 1" 3000# w/ Manual Gate Valves
Liquid Level Gauge: %u00A02- %u00A0NPT 3/4" %u00A06000# Couplings / Reflex Gauge w Valves
PSV, Drain: %u00A0 %u00A0 %u00A02- NPT 1" %u00A0 6000# Couplings %u00A0(Provision Included)
Level Control: %u00A01- %u00A0NPS 4 ASME 600 Flange (Provision Included)
Level Alarm %u00A0 %u00A0 1- %u00A0NPS 4 ASME 600 Flange (Provision Included)-Sandblasted and externally Urethane Painted , Cleaned inside.%u00A0
-Supplied with all applicable Quality Control Documentation and As-Built drawings.
-Installation and Operations Manuals%u00A0
-Unit is suitable for steam out condition @ full vacuum at 150 Deg C
.%u00A0
Rated Gas Capacity (99.9% free liquid removal) :%u00A0%u00A0%u00A0%u00A0 (25 mmscfd @ 1000 psig %u00A0or %u00A08 mmscfd @ 300 psi) %u00A0%u00A0%u00A0%u00A0%u00A0Maximum Pressure Drop across Separator:: 1 psiRated Liquid Removal Capacity - 1 gal/,min %u00A0 ( if automated liquid dump)Auxiliary Equipment :%u00A0%u00A0%u00A0%u00A0NPT %u00A01: %u00A06000# Gate Valve Manual Drain x 2%u00A0%u00A0%u00A0%u00A0NPT %u00A0%u00BE" %u00A0NPT Level Gauge%u00A0%u00A0%u00A0%u00A0NPT %u00A01 - 6000# PSV%u00A0 %u00A0 %u00A0 %u00A0NPS 6- %u00A0600# %u00A0Bolting and GasketsOperation Guarantee:
The Innopipe pipeline separators are designed to remove free liquids from natural gas streams. The attached independent test shows that they will remove 99.9 % of the normally flowing free liquids that the separator will see based on the provided pipeline design criteria.

Show Less

3x8 -1480 Innopipe Separator (2" unit pictured)Sizing Criteria:%u00A0
1692 Sm3/hr @ 2250 kPa
Operating Pressure:%u00A0
2250 kPa - 6240 kPa
Operating Temperature:%u00A0
0-15 C
SG of Gas -%u00A0
0.65 %u00A0Inlet Line - %u00A0
NPS 3 ASME 600#
Corrosion Allowance:%u00A0
1.6 mmConstruct to CSA B51-14 / ASME Section VIII Div 1 latest edition
Design Pressure:%u00A0
10,204 kPag ( 1480 psig)
Design Temperature:%u00A0
-29 C to 38 CItem #: 1%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0Quantity: 1
Description
Separator section size:%u00A0
NPS 3 %u00A0pipe size %u00A0X NPS 8 %u00A0outer chamber.Overall Length: app 1.2 m%u00A0
Liquid Chamber Size:%u00A0%u00A0%u00A0%u00A0NPS 8" %u00A0x 26"%u00A0%u00A0%u00A0%u00A0%u00A0
Above Ground Installation :%u00A0
Yes
Piggable :%u00A0%u00A0No
NDE: %u00A0 %u00A0%u00A0As required by Code%u00A0
Stress relieved:%u00A0No
Materials of Construction:%u00A0%u00A0SA-106-B /SA-105
Registered as Pressure Vessel: CRN R7443.2- with ABSA -
Hydrotested to 1.3 x MWP
Approximate Weight:%u00A0%u00A0300 lbsSeparator Connections:
Inlet/Outlet:%u00A0
NPS 3 - Sch XS - ASME 600 RFWN SA-105
4- %u00A0NPT 3/4 %u00A03000# SA-105N - Level Gauges, %u00A0( each side)%u00A0
2- %u00A0NPT 1 %u00A03000# SA-105N - Vent, PSV, %u00A0
2 - NPT 2 %u00A03000# SA-015N - Liquid Outlet , Level Control (future),All nozzles and reinforcement shall be set through, full penetration weldedRated Gas Capacity (99.9% free liquid removal) - %u00A0
3200 Sm3/hr @ 2250 kpa, %u00A0%u00A0
9000 Sm3/hr @6240 kPaRated Liquid Capacity -%u00A0
3 m3/hr condensate, %u00A0
w/auto dump
Liquid Storage: %u00A0
Approx. 25 liters%u00A0
Maximum Pressure Drop across Separator:%u00A0
less than %u00A010 kPa
Auxiliary Equipment Included :
NPT 2 - 3000# Gate Valve%u00A0
NPT %u00BE %u00A0Level Gauge
NPT 1 - 3000# Gate/Ball Valves/PSV
NPS 6- %u00A0600# %u00A0Bolting and GasketsDelivery: 4 weeks a.r.a.d./a.r.o.
Operation GuaranteeThe Innopipe pipeline separator is designed to remove free liquids from natural gas streams. It will remove 99% of the normally flowing free liquids that the separator will see based on the above stated pipeline design criteria.

Show Less

4 x 6 -285 Innopipe Separator (Note: 6" inlet unit pictured)Sizing Criteria:
Operating Pressure: 202 CFM @ 2 psig)
SG of Gas : 0.65 - 0.90 rangeGas Inlet/Outlet Line:
NPS 4 ASME 150# RFiquid Outlet
NPT 1", 2000# Manual ValveConstructed to
CSA B51-19 / ASME Section VIII Div 1 2023 EditionAbove Ground Installation- Non-PiggableASME U Stamp/ National Board Registration available as optionDesign Pressure:
275 psig
Design Temperature:
-20 to 120 deg FDetailed description of the Innopipe System:
Item #: 1 Quantity: 1Description
- Innopipe Separators use patented flow communicating chambers with liquids retained in a stabilized reservoirSeparator Size:
NPS 4 X NPS6 In-Line Horizontal Orientation
Footprint:
30" high x 42" Centerline Inlet/Outlet FlangeLiquid Reservoir Size:
NPS 6 x 30" (vertical) approx 1.0 cu ft. (approx. 5 US Gallons)
Supports:
N/A adequately supported inline piping will provide supportNDE:
As required by CodeStress Relieved:
As required by CodeService:
SweetMaterials of Construction:
SA-106-B Smls/ SA-105NHydrotested :
1.3 x 275 psigSeparator Weight:
approx. 250 lbsSeparator Connections:Gas Inlet/Outlet:
2- NPS 4 Sch 40 ASME 150 RFLiquid Reservoir Connections:Liquid Outlet:
1 - NPT 1 2000# w/ Manual Gate ValveLiquid Level Gauge:
2- NPT 3/4 2000# Couplings for reflex gauge c.w. valves
PSV, Drain:
2- NPT1 2000# Couplings (Provision Included)
Level Alarm/Control:
1- NPS 2 2000# (Provision Included)-Sandblasted and externally Urethane Painted,
Cleaned inside.
-Supplied with all applicable Quality Control documentation and As-Built drawings.
-Installation and Operations Manuals
-Unit is suitable for steam out condition @ full vacuum at 150 Deg CRated Gas Capacity (99.9% free liquid removal) :
(300 CFM @ 2 psig operating pressure)
Maximum Pressure Drop across Separator:
0.25 psigRated Liquid Removal Capacity:
10 gal/min with automatic liquid dump
Auxiliary Equipment :
- NPT 1:
-2000# Valve Manual Drain
- NPT 3/4": -
NPT Level Gauge
NPS 4:
150# Bolting and Gaskets
NPS 2
2000# Level Provision - ArmstrongDelivery: Typically 3-4 weeks a.r.a.d./a.r.o.
Operation Guarantee:
The Innopipe inline separator is designed to remove free liquids from natural gas streams.
These will remove 99% of the normally flowing free liquids that the separator will encounter based on the provided pipeline design criteria.

Show Less

Innopipe, liquid removal system
Customized design specifically for capturing carried over liquids downstream of a gas processing tower. (glycol/ amine)

Designed as a fitting, limited by CSA B51 to NPS 6 to 1.5 cu.ft total volume.
The user advantages:
- No PSV required
- No ABSA signoff at installation or operations level
- No annual maintenance fees with for the life of the fitting.
- Unit is capable of mounting in-line, without additional supports in most casesDESCRIPTION:
NPS 6 - 600#RF %u00A01440 psig Innopipe SeparatorSizing Criteria:
Operating Pressure%u00A0
20 mmscfd @ 800psig
SG of Gas- 0.65 - 0.70Gas Inlet/Outlet Line
NPS %u00A06 ASME 600# RF%u00A0
Liquid Outlet
NPT 1 3000# Manual ValveConstruct to
CSA B51-19 / ASME Section VIII Div 1 2021 Edition
ABSA Registration as a Pressure Fitting
CSA B51 Category H Table 1
1440 psi rating
Maximum Diameter:
NPS 6
Maximum Volume - 1-1/2 cubic feetAbove Ground Installation
Non-Piggable Alberta CRN
TBDASME U Stamp/ National Board Registration available.Design Pressure:
9,930 kPag (1440 psig)
Design Temperature:
-20 to 120 deg FItem #: 1
Quantity: 1Description
Innopipe Separators uses patented flow communicating chambers with liquids retained in stabilized reservoirSeparator Size:
NPS 6 X NPS 6
In-Line Horizontal Orientation
Footprint:
36" high
40" Inlet/Outlet Flange elevationLiquid Reservoir Size:%u00A0
NPS 6 x 36" (vertical) %u00A0approximately 0,5 cu ft. (approximately 5 gallons)%u00A0
Supports :
Not appliccable
In-Line PipingNDE:%u00A0
As required by Code%u00A0
Stress Relieved:
As required by Code%u00A0%u00A0%u00A0%u00A0Service:%u00A0
SweetMaterials of Construction:
SA-516-70N/SA-106-B Smls/ SA-105NHydrotested :%u00A0
1.3 x 1440 psig%u00A0
Separator Weight:
approx. 250 lbsSeparator Connections:
Gas Inlet/Outlet:
2- NPS 6 %u00A0Sch 80 ASME 600 RFWN %u00A0%u00A0%u00A0%u00A0Liquid Reservoir Connections:
Liquid Outlet:
1 - NPT 1 3000# w/ Manual Gate ValveLiquid Level Gauge:%u00A0
2- %u00A0NPT 3/4 %u00A03000# Couplings
for Reflex Gauge w. valvesPSV, Drain: %u00A0 %u00A0%u00A0
2- NPT1 %u00A0 3000# Couplings%u00A0
(Provision Included)Level Control: %u00A0
1- %u00A0NPS 2 ASME 600 Flange
(Provision Included)-Sandblasted and externally urethane painted,
Cleaned inside.%u00A0
-Supplied with:
all applicable quality control documentation
As-Built drawings.
Installation and Operations ManualsUnit is suitable for steam out condition @ full vacuum at 150 Deg C
.%u00A0
Rated Gas Capacity (99.9% free liquid removal):
(30 mmscfd @ 700 to 1000 psig operating pressure) %u00A0
Maximum Pressure Drop across Separator:
1 psigRated Liquid Removal Capacity
1 gal/min %u00A0Auxiliary Equipment :%u00A0
NPT 1: 3000# Valve, Manual Drain%u00A0
NPT %u00A03/4" %u00A0NPT Level Gauge%u00A0
NPS 6 %u00A0600# %u00A0Bolting and Gaskets
NPS 2 %u00A0600# Level Provision - w/ blind CoverDelivery:%u00A0
Typically 6-8 %u00A0weeks A.R.A.D, A.R.O.Operation Guarantee:The Innopipe pipeline separators are designed to remove free liquids from natural gas streams. The attached independent test shows that they will remove 99.9 % of the normally flowing free liquids that the separator will see based on the provided pipeline design criteria.

Show Less

6x10 -1480 Innopipe Separator (similar unit design pictured)Unit can be built to be piggable or non-piggable, depending on operational requirements.Sizing Criteria:
45,000 std m3/hr @ 6240 kPa
Operating Pressure:%u00A0
2250 kPa - 6240 kPa
Operating Temperature:%u00A0
0-15 C
SG of Gas:- 0.65 %u00A0Inlet Line:
NPS 6 ASME 600#
Corrosion Allowance:
1.6 mmConstructed to CSA B51-14 / ASME Section VIII Div 1 2017 Edition
Design Pressure:%u00A0
10,204 kPag (1480 psig)
Design Temperature:%u00A0
29 C to 38 CItem #: 1%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0%u00A0Quantity: 1
Description
Separator section size:%u00A0
NPS 6 %u00A0pipe size X NPS 10 outer chamber.Overall Length:%u00A0
Approximately 1.6 m%u00A0
Liquid Chamber Size:%u00A0%u00A0%u00A0%u00A0
NPS 10" %u00A0x 24-36"%u00A0%u00A0%u00A0%u00A0
Above Ground Installation : Yes
Piggable : %u00A0YEs or NO, %u00A0please specify at time of orderNDE: %u00A0 %u00A0
As required by Code%u00A0
Stress relieved:%u00A0
no
Materials of Construction:%u00A0
SA-106-B /SA-105
Registered as Pressure Vessel%u00A0
CRN R2417.2- with ABSA certification -
Hydrotested to 1.3 x Maximum Allowable Working Pressure
Approximate Weight:
500 lbsSeparator Connections:
Inlet/Outlet:%u00A0
NPS 6 - Sch XS - ASME 600 RFWN SA-105
4- %u00A0NPT 3/4" %u00A03000# SA-105N - Level Gauges, (each side)%u00A0
2- %u00A0NPT 1" %u00A03000# SA-105N - Vent, PSV, %u00A0
2 - NPT 2" %u00A03000# SA-105N - Liquid Outlet , Level Control (future),All nozzles and reinforcement shall be set through, full-penetration weldedRated Gas Capacity (99.9% free liquid removal):
45,000 Std. m3/hr @ 4200 kPa, %u00A0 56,000 std. m3/hr @6200 kPaRated Liquid Capacity:
10 m3/hr condensate,%u00A0
Liquid Storage:%u00A0
7.5 -10 gallons
Maximum Pressure Drop across Separator:%u00A0
less than 10 kPaAuxiliary Equipment included:
NPT 2 - 3000# Gate Valve%u00A0
NPT 3/4" Level Gauge
NPT 1" - 3000# Gate/Ball Valves/PSV
NPS 6"- %u00A0600# %u00A0Bolting and GasketsDelivery:%u00A0
Typically 4 weeks a.r.a.d.Operation Guarantee:
The Innopipe pipeline separators are designed to remove free liquids from natural gas streams. Independent tests shows they remove 99% of the normally flowing free liquids that the separator will see based on provided pipeline design flow conditions provided.

Show Less

Innopipe Piggable Drip
Section size: NPS 8 pipe size X NPS 12 outer chamber
Overall Length: 16 feet
Weight: 1500 lbs
Piggable: Yes
Installation: Below GradeConnections:
• Gas Inlet/Outlet: Qty (2) - NPS 8, ANSI 150 FF Flange
• Outlets to Reservoir: Qty (2) - NPS 3 BE Sch 40- SA-106-B SMLSSizing Criteria: Gas Flow Rate- 3 mmscfd
Gas Specific Gravity: 0.58Liquid Flow Rate: 50 BBL/day average)Design Pressure: 250 psig, Class 150 ANSI, Operating Pressure: 100 psigRated Capacity
Gas Flow Rate (99.9% free liquid removal): 20 mmscfd @ 250 psi
10 mmscfd @ 125 psiMaximum Pressure Drop across Separator: less than 1 psiLiquid Removal Capacity: Up to 1000 Bbl/day.Pipeline Size NPS 12 HDPE SDR 7
Design Code ASME B31.8 (Prefabricated Assemblies Paragraph 831.3.5)
RequirementSour Service: NACE MR0175/ISO 15156 compliance requiredHydrotested 1.5 x 250 psi = 375 psi min.%u00A0
Hydro to be held for 4 hours c.w. pressure chart recorder, as per ASME code B31.8Note:
• All nozzles and reinforcement shall be set through, full penetration welded
• External- Sandblasted and Tarset or equivalent Coal Tar Epoxy to coating manufacturer's specifications

Show Less